Forums PSPGen

OK!

For PSP-100X (Phat) 5.50 GEN-B only, must replace the file flash0:/kd/systemctrl.prx with this: Download | Mirror


Otherwise, there will be problems with the Homebrew, Hellcat's Recovery Flasher, Hellcat's Pandora Installer, etc.

can you please repack the whole Homebrew ?

and perhaps put a tutorial for people like me and you who are having problems with running the HELLcat homebrew ?

Thanks in advance

This is all manual.

If you have a 5.50 GEN-B on the PSP-100X, then in order to make things work:

• Hellcat's Recovery Flasher
• Hellcat Pandora Installer
• NAND MANAGER
• Homebrew
• UO GPSP kai
• PSX Saves
• Format Flash1
• etc ...

Need to replace the file with errors systemctrl.prx in Flash0 with this: Download | Mirror
It lies in the folder with the firmware: flash0:/kd/systemctrl.prx

Then you can easily roll away with Recovery Flasher on 5.00M33-6

but touching Flash0 could be dangerous for my PSP 1004.

Do you know another procedure that is not dangerous ?

Oui, elle est dangereuse si vous faites une erreur.
Dans un autre chemin.
Mais déjà retourné à 5.00 M33-6 de très nombreuses personnes.

En général, vous devriez toujours avoir une réserve Despertar del Cementerio v8 !

i don't understand ....

can you please write in english ?

Oops, Sorry. I forgot that I was in the English corner. I'm very bad speak French & English ))

Yes, it is dangerous if you do not follow instructions!

But if you know what Flash0, then there is nothing complicated.
This file, which I propose, simply from the firmware 5.50 GEN-A.
It operates Recovery Flasher and you can easily revert to 5.00 M33-6

Thanks for the file, nice to see SNES working under 5.50 GEN B on the phat PSP.

Recovery -> Advanced -> USB Flash 0

Replace the systemctrl.prx under the kb folder.